Heap - Revision history

Pbug: /* OpenBSD's removal of the Heap */

2005-11-10T10:51:50Z

OpenBSD's removal of the Heap

← Older revision		Revision as of 03:51, 10 November 2005
Line 13:		Line 13:

	[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV [[signal]] saving the program from a successful heap attack.		[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV [[signal]] saving the program from a successful heap attack.

			[[Image:OpenBSD-heap.png]]

Pbug at 20:35, 9 November 2005

2005-11-09T20:35:13Z

← Older revision		Revision as of 13:35, 9 November 2005
Line 1:		Line 1:
	A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Since [[virtual memory]] is being used not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of (on-demand) [[paging]], it is built up of [[text]], data, uninitialized data (bss), heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Since [[virtual memory]] is being used not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of (on-demand) [[paging]], it is built up of [[text]], data, uninitialized data (bss), heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.

			[[Image:Stack.png]]

	=== Heap Overflows ===		=== Heap Overflows ===

Pbug at 19:31, 9 November 2005

2005-11-09T19:31:22Z

← Older revision		Revision as of 12:31, 9 November 2005
Line 1:		Line 1:
	A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Since [[virtual memory]] is being used not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Since [[virtual memory]] is being used not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of (on-demand) [[paging]], it is built up of [[text]], data, uninitialized data (bss), heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.

Pbug at 10:54, 8 October 2005

2005-10-08T10:54:04Z

← Older revision		Revision as of 03:54, 8 October 2005
Line 1:		Line 1:
	A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). ~~Not~~ all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Since [[virtual memory]] is being used not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.

Pbug at 10:49, 8 October 2005

2005-10-08T10:49:49Z

← Older revision		Revision as of 03:49, 8 October 2005
Line 1:		Line 1:
	A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A [[process]] covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a [[process]] has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the [[process]] is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A [[process]] would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.

Pbug at 10:48, 8 October 2005

2005-10-08T10:48:11Z

← Older revision		Revision as of 03:48, 8 October 2005
Line 1:		Line 1:
	A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.



Line 6:		Line 7:
	Due to bad programming some programs allow writing past the end of a buffer that has been allocated on the heap. This can result in the overwriting of other buffers and/or text.		Due to bad programming some programs allow writing past the end of a buffer that has been allocated on the heap. This can result in the overwriting of other buffers and/or text.
	Another explanation is [http://en.wikipedia.org/wiki/Heap_overflow here].		Another explanation is [http://en.wikipedia.org/wiki/Heap_overflow here].



	=== OpenBSD's removal of the Heap ===		=== OpenBSD's removal of the Heap ===

	[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV [[signal]] saving the program from a successful heap attack.		[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV [[signal]] saving the program from a successful heap attack.

Pbug at 10:47, 8 October 2005

2005-10-08T10:47:43Z

← Older revision		Revision as of 03:47, 8 October 2005
Line 1:		Line 1:
	A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.		A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV [[signal]] and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.


Line 9:		Line 9:
	=== OpenBSD's removal of the Heap ===		=== OpenBSD's removal of the Heap ===

	[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV saving the program from a successful heap attack.		[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV [[signal]] saving the program from a successful heap attack.

Pbug: /* Heap Overflows */

2005-10-08T10:46:30Z

Heap Overflows

← Older revision		Revision as of 03:46, 8 October 2005
Line 5:		Line 5:

	Due to bad programming some programs allow writing past the end of a buffer that has been allocated on the heap. This can result in the overwriting of other buffers and/or text.		Due to bad programming some programs allow writing past the end of a buffer that has been allocated on the heap. This can result in the overwriting of other buffers and/or text.
			Another explanation is [http://en.wikipedia.org/wiki/Heap_overflow here].

	=== OpenBSD's removal of the Heap ===		=== OpenBSD's removal of the Heap ===

	[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV saving the program from a successful heap attack.		[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV saving the program from a successful heap attack.

Pbug at 10:45, 8 October 2005

2005-10-08T10:45:15Z

New page

A process covers the entire address space for the size of a pointer (32 bit in 32 bit architectures, 64 bit for 64 bit architectures). Not all areas of a process has real memory assigned to it and only some parts (access to parts that have no memory results in a SIGSEGV and the process is killed). A process may start small and grow by use of [[paging]], it is built up of [[text]], data, uninitialized data, heap and [[stack]]. Of these the heap and stack can grow nearly endlessly. The [[stack]] is at a high address (0xfff00000 according to Design and Implementation of the 4.4BSD Operating System, but this has most likely changed) and grows downward toward the beginning of the address space. The heap is at an address higher than text and data and grows upwards in address space. The sbrk(2) system call is used to grow the heap when memory is needed by the malloc(3) routines. A process would be nearly 4 gigabytes in size when heap and stack meet, this was thought of as unlikely in early implementations of UNIX due to the restrictions in memory. Today 64 bit systems widen the margin of stack and heap ever meeting.

=== Heap Overflows ===

Due to bad programming some programs allow writing past the end of a buffer that has been allocated on the heap. This can result in the overwriting of other buffers and/or text.

=== OpenBSD's removal of the Heap ===

[[OpenBSD]] has done away with a heap growing upwards in version 3.8. Instead they [[mmap]] a region at a random location while making sure that other mapped regions are never adjacent creating a gap of uninitialized memory. This gap they call "guard pages" and they serve the function that when a buffer is overwritten that it will write into the guard page and cause a SIGSEGV saving the program from a successful heap attack.