Asterisk

X100P card

Linux:

# lspci -lv | less -XF

and see if you can find something similar:

0000:01:05.0 Communication controller: Motorola: Unknown device 5608
       Subsystem: Motorola: Unknown device 0000
       Flags: bus master, medium devsel, latency 64, IRQ 201
       I/O ports at de00 [size=256]
       Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [40] Power Management version 2

BSD:

# pciconf -lv | less -XF
none0@pci2:2:0: class=0x078000 card=0x00001057 chip=0x56081057 rev=0x00 hdr=0x00
   vendor   = 'Motorola'
   device   = 'SM56 PCI Fax Voice Modem'
   class    = simple comms

# lsmod | less -XF

and see if you can find the same modules loaded:

ztdummy                 3880  0 
zaptel                227876  8 ztdummy,wcfxo
crc_ccitt               2144  1 zaptel
rtc                    14420  1 ztdummy

now to try zttool:

 # zttool
    Alarms          Span                                              
      OK              Wildcard X100P Board 1

Voicmail Setup for single answering machine

# cat extensions.conf
[incoming]
exten => s,1,Wait,2
exten => s,2,Answer
exten => s,3,DigitTimeout,5
exten => s,4,ResponseTimeout,10
exten => s,5,WaitExten(3)
exten => #,1,Hangup
exten => 88,1,VoicemailMain
exten => 88,2,Hangup
exten = t,1,Voicemail(1)
exten = t,2,Hangup 

or you can make a personal greeting instead of the generic by replacing the "t" lines:

exten => t,1,BackGround(alisonsayingleaveamessage)
; make sure you have alisonsayingleaveanessage.gsm in your asterisk/sounds directory
exten => t,2,Voicemail(s1)
exten => t,3,Hangup

# cat voicemail.conf
[general]
; You may not want all of these formats "show file formats" 
; at the Asterisk console for a list of formats available
format=wav49|gsm|wav
serveremail=asterisk
attach=yes
minmessage=3
skipms=3000
maxsilence=10
silencethreshold=128
maxlogins=3
; I have a script that changes permissions on new voicemails 
; so I can use them in a webpage defined in externnotify
; externnotify=/usr/bin/vmperms
fromstring=The answering machine 
emaildateformat=%A, %B %d, %Y at %r
[zonemessages]
eastern=America/New_York|'vm-received' Q 'digits/at' IMp
central=America/Chicago|'vm-received' Q 'digits/at' IMp
central24=America/Chicago|'vm-received' q 'digits/at' H N 'hours'
military=Zulu|'vm-received' q 'digits/at' H N 'hours' 'phonetic/z_p'
[default]
; 54322 is your password below
; john@example.com will be emailed when there is a new voicemail
1 => 54322,The Family,john@example.com